Capacitance converter
Convert capacitor values between pF, nF, uF, mF and F, and decode the three-digit codes printed on small capacitors.
About Capacitance Converter
Capacitors are sold in values that span twelve orders of magnitude, so the same part may be listed as 0.1 uF, 100 nF or 100,000 pF depending on the shop. This converter moves between picofarads, nanofarads, microfarads, millifarads and farads as you type. The reference table explains the three-digit code stamped on many ceramic capacitors, where the first two digits are a number and the third is the number of zeros, counted in picofarads. Tolerance and voltage ratings are not part of the conversion.
- Matching a parts list that uses nF with a shop that lists uF.
- Reading the 104 or 473 printed on a ceramic capacitor.
- Checking a filter or timing calculation that wants farads.
- Comparing supercapacitors, listed in farads, with ordinary capacitors.
How to use Capacitance Converter
Step 1
Type the capacitance.
Step 2
Choose the unit it is written in and the unit you want.
Step 3
Read the answer, or use the code table for a part marking.
Good to know
- 104 means 10 followed by four zeros in picofarads, which is 100,000 pF, 100 nF or 0.1 uF.
- Some old parts and schematics print uF as mfd or MFD. It means microfarad, not millifarad.
- This tool converts the nominal value only. Real capacitors have a tolerance, often 5 to 20 percent, and ratings that this page cannot read from a marking.
Common questions
How many nanofarads are in a microfarad?
1,000. One microfarad is 1,000 nanofarads and 1,000,000 picofarads.
What does 104 on a capacitor mean?
Take the first two digits as a number and add as many zeros as the third digit says, then read it in picofarads. So 104 is 100,000 pF, which is 0.1 uF.
Is mF the same as MF?
No. Lower case m is milli, a thousandth. In older documents MF sometimes meant microfarad, so check the part number or the context.