Concrete calculator
Choose the shape, type its size and pick a mix ratio to see the volume and the materials.
About Concrete Calculator
Pick what you are pouring and enter its dimensions. The tool works out the wet volume, adds wastage, and converts it to a dry volume with a factor between 1.54 and 1.57, because loose cement, sand and stone fill more space than the finished concrete. The dry volume is shared out by your mix ratio into cement, sand and coarse aggregate. Cement is shown in kilograms and in bags. Use metric or imperial units.
- Ordering ready-mix or planning a hand mix.
- Buying the right number of cement bags.
- Comparing the cost of two slab thicknesses.
- Checking a quantity supplied in a quote.
How to use Concrete Calculator
Step 1
Choose slab, footing, column, beam or staircase and enter the size.
Step 2
Pick the mix ratio and set the wastage.
Step 3
Read the volume, cement bags, sand and aggregate.
Good to know
- Worked example: a 5 m by 4 m slab, 150 mm thick, is 3 m³. At 1:2:4 and a 1.54 factor it needs about 951 kg of cement, or 20 bags of 50 kg.
- Ratios such as 1:2:4 are nominal mixes by volume. For structural work, follow the mix design your engineer specifies.
- The result is an estimate for planning. Ask an engineer to confirm quantities for beams, columns and stairs.
Common questions
Why is the dry volume larger than the wet volume?
Loose cement, sand and stone have air gaps between them. When mixed with water they pack down, so you need roughly 1.54 to 1.57 times the finished volume in dry material.
How heavy is a bag of cement?
Bag sizes differ by country. The tool assumes 50 kg and lets you change it. It uses a bulk density of 1,440 kg/m³.
How much extra should I order?
Five percent covers spillage and uneven ground. Use more if the base is rough or the pour is long.