CompleteSEOTools
Home › Device Tests › Microphone Test

Microphone test

See your microphone level move as you speak, then record a short clip and play it back.

About Microphone Test

Press Start and allow microphone access when your browser asks. The meter shows how loud the signal is in decibels below full scale, and the waveform shows its shape. If both move when you speak, the microphone is reaching your browser. You can also record up to ten seconds and play the clip back to hear what other people would hear. It all happens in your browser. The audio is not uploaded, and the clip is gone when you close the page.

  • Checking a new headset or USB microphone before a meeting.
  • Choosing the right input when your computer has several.
  • Finding out whether a mute switch or system setting is silencing the mic.
  • Hearing your recording quality before you record something important.

How to use Microphone Test

1

Step 1

Press Start and choose Allow when the browser asks for the microphone.

2

Step 2

Speak and watch the meter and the waveform. If nothing moves, pick another device in the list.

3

Step 3

Press Record, say a few words, then play the clip back. Use headphones to avoid echo.

Good to know

  • The device list shows real names only after you allow access. Before that, the browser hides them.
  • Browsers apply echo cancellation and noise reduction by default, so a clip may sound cleaner than the raw microphone. Tick the raw signal box to switch that off.
  • If the meter stays flat, check the operating system's privacy settings. They can block the browser even when this page is allowed.

Common questions

Is my voice uploaded?

No. The sound is processed inside your browser, and the playback is a temporary file in its memory.

Why does the browser ask for permission?

A site cannot hear your microphone unless you say yes. You can change the answer at any time in the site settings next to the address bar.

Why is the meter in negative numbers?

Digital audio has a loudest possible level, called 0 dB full scale, and everything quieter is a negative number. Normal speech often lands between about minus 40 and minus 10 on this meter, depending on the microphone gain.