Architectural scale converter
Pick the drawing scale, type a length and see the real size, or switch direction to find the size on paper.
About Architectural Scale Converter
A drawing scale of 1:50 means every unit on paper stands for 50 of the same unit in the building. Imperial scales work the same way: a quarter inch to the foot is 1 to 48. Choose a scale from the list or type your own ratio, enter a length in millimetres, centimetres, metres, inches or feet, and the tool gives the converted length in several units, including feet and inches rounded to a sixteenth. Use it to read a plan or to size something for a drawing.
- Reading a dimension off a printed plan.
- Finding how long a wall will be drawn at 1:100.
- Switching between metric and imperial scales.
- Checking a scale bar against a measurement.
How to use Architectural Scale Converter
Step 1
Choose the direction and the scale.
Step 2
Type the length and choose its unit.
Step 3
Read the result in millimetres, metres, inches and feet.
Good to know
- Worked example: 20 mm measured on a 1:50 drawing is 1,000 mm, or 1 m, in real life.
- Plans copied or printed to fit a page may not be to scale. Check against a printed scale bar or a known dimension.
- Areas scale with the square of the ratio. Do not use this tool directly for areas.
Common questions
What does 1:50 mean?
One unit on the drawing equals 50 of the same unit in real life. 1 cm on paper is 50 cm in the building.
What is 1/4 inch = 1 foot?
A quarter inch on paper stands for twelve inches in real life, which is a ratio of 1 to 48.
Is the feet and inches value exact?
It is rounded to the nearest sixteenth of an inch. The millimetre figure is the exact conversion.