Brick calculator
Enter the wall size and the brick size to get the number of bricks and the volume of mortar.
About Brick Calculator
This calculator counts bricks by the face area each one covers, including its mortar joint, and multiplies that by the number of brick widths in the wall. Doors and windows are taken off first. Pick one of three common brick sizes or type your own, then add a wastage figure for breakage and cutting. The mortar result is the wall volume minus the volume of the bricks, shown both wet and dry. Nothing you type leaves your browser.
- Ordering bricks for a boundary wall or a room.
- Checking a contractor's quote against your own count.
- Estimating mortar before you buy cement and sand.
- Comparing half-brick and one-brick walls.
How to use Brick Calculator
Step 1
Type the wall length and height, and the area of any openings.
Step 2
Choose the wall thickness, the brick size and the joint thickness.
Step 3
Read the bricks to order and the mortar volume.
Good to know
- Worked example: a 10 m by 3 m wall of 190 x 90 x 90 mm bricks with 10 mm joints, half a brick thick, needs 1,500 bricks before wastage.
- Real bricks vary in size. Measure a few from your supplier and use the custom option.
- This counts one layer of plain walling. Arches, piers, corners and cavity walls need extra bricks that are not included.
Common questions
How many bricks are in one square metre of wall?
With 190 x 90 x 90 mm bricks and 10 mm joints, a half-brick wall takes 50 per square metre. The count changes with brick size and joint thickness.
What wastage should I use?
Five percent is a common starting figure. Use more for cut-heavy work, long hauls or soft bricks.
Does this give cement and sand?
It gives the mortar volume, wet and dry. Split the dry volume by your mortar mix to get cement and sand.