Electricity bill calculator
Enter the units used and your tariff slabs to see the bill, or list your appliances to estimate the units first.
About Electricity Bill Calculator
Many suppliers charge different rates for different blocks of units, called slabs. This calculator lets you type your own slabs, rates, fixed charge and tax, then works out how many units fall in each slab and what each costs. If you do not know your units, switch to the appliance tab. Enter the watts, number and daily hours of each device and it adds up the kWh, shows each share and feeds the bill. The slab rates shown start as examples only.
- Predicting next month's bill before it arrives.
- Finding which appliances use most of the units.
- Seeing what an extra air conditioner might add.
- Checking a bill against the slab rates you were quoted.
How to use Electricity Bill Calculator
Step 1
Choose a bill from units, or estimate units from appliances.
Step 2
Type your slabs, rates, fixed charge and tax from your own tariff.
Step 3
Read the total and the slab breakdown, or copy and download the table.
Good to know
- Example: 350 units with 100 at 3, 200 at 4.5 and the rest at 6, plus a fixed charge of 50 and 10 percent tax, comes to 1,705.
- The slabs and rates on the page are examples. Real tariffs also have surcharges, meter rent and time-of-day rates that are not modelled, so compare the result with an actual bill.
- Appliance estimates assume the watts rating runs the whole time. Fridges, air conditioners and similar devices cycle on and off, so real use is often lower.
Common questions
How is a slab bill calculated?
Units are split into blocks. Each block is charged at its own rate. The block charges are added, then the fixed charge, then tax on the total.
How do I find the units a device uses?
kWh = watts x hours / 1000. A 1,000 W heater used for 5 hours uses 5 kWh.
Is tax added before or after the fixed charge?
This tool applies the tax percent to the energy charge plus the fixed charge. If your supplier taxes only the energy charge, enter the tax as zero and add it yourself.