CompleteSEOTools
Home › Electrical & Electronics › Resistor Color Code Calculator

Resistor color code calculator

Pick the band colours to read a resistor, or type a value to see which colours to look for.

About Resistor Color Code Calculator

Small resistors carry their value as coloured bands. This calculator reads them both ways. Choose four, five or six bands, set each colour from the lists and the value, tolerance and range appear with a drawing of the resistor. In the other direction, type a value such as 4.7k and the colour order is listed and drawn. Four-band codes hold two digits, five- and six-band codes hold three, and the sixth band gives the temperature coefficient.

  • Identifying a loose resistor from a parts bin.
  • Checking a value before soldering.
  • Finding the colours to expect when buying a value.
  • Teaching the colour code with a drawing.

How to use Resistor Color Code Calculator

1

Step 1

Choose 4, 5 or 6 bands.

2

Step 2

Select each band colour, or switch to Value to bands and type the resistance.

3

Step 3

Read the value, tolerance and range, and compare with the drawing.

Good to know

  • Hold the resistor with the tolerance band, often gold or silver, on the right. The bands are read from the left, and the gap before the last group shows which end to start from.
  • Example: yellow, violet, red, gold is 47 x 100 = 4,700 ohms at 5 percent, so between 4,465 and 4,935 ohms.
  • Colours can look alike under poor light, such as brown, red and orange. If it matters, measure the resistor with a meter. Temperature coefficient codes vary a little between makers, so check the data sheet.

Common questions

What do the four bands mean?

The first two bands are digits, the third is the multiplier and the fourth is the tolerance. Yellow, violet, red, gold reads 4, 7, times 100, plus or minus 5 percent.

What is the difference between 4, 5 and 6 bands?

Five-band resistors add a third digit for more precise values. Six-band resistors add a temperature coefficient band, in parts per million per kelvin.

Why can a value be refused with four bands?

Four bands carry only two significant digits. A value such as 4.75k needs three, so the tool shows the nearest value and suggests five bands.