CompleteSEOTools
Home › Construction Calculators › Staircase Calculator

Staircase calculator

Enter the total rise and your preferred riser and tread to see the layout of a straight stair.

About Staircase Calculator

A stair is a set of equal risers that together climb the floor-to-floor height. Enter that height and the riser you would like. The calculator rounds to a whole number of risers, finds the exact riser height, and uses your tread depth to give the horizontal run, the slope angle and the length along the slope. It also checks the common comfort rule that twice the riser plus the tread comes to about 630 millimetres, and warns if your space or headroom is too small.

  • Laying out a straight staircase.
  • Checking that a stair fits the space.
  • Finding the exact riser when the height does not divide evenly.
  • Comparing steeper and gentler designs.

How to use Staircase Calculator

1

Step 1

Enter the total rise and your preferred riser and tread.

2

Step 2

Optionally enter the space and headroom you have.

3

Step 3

Read the number of steps and the checks.

Good to know

  • Worked example: a 3 m rise with a 170 mm riser gives 18 risers of 166.7 mm. With 250 mm treads the run is 4.25 m.
  • Local building rules limit riser height, tread depth, headroom and handrails. Check yours before building.
  • This covers a straight flight only. Landings, winders and spiral stairs need separate design.

Common questions

What is 2R + T?

It is a comfort guide: twice the riser height plus the tread depth. Around 630 mm, or 24 to 25 inches, is a commonly used figure. It is a guide, not a rule.

Why is there one tread fewer than risers?

In a straight flight the top floor acts as the last tread, so there are n risers and n minus 1 treads.

Does this check building codes?

No. Codes differ by place. Use the result to plan, then check the rules that apply to you.