Tile calculator
Enter the room size and the tile size to see how many tiles to buy.
About Tile Calculator
The tile count is the area to be tiled divided by the area of one tile plus its share of grout. Enter the room length and width, subtract any area you will not tile, and give the tile size and grout gap. Wastage covers cuts, breakage and spares. If you tell the tool how many tiles come in a box, it also rounds up to whole boxes. The calculator works for floors and walls in metric or imperial units.
- Ordering tiles for a bathroom, kitchen or hall.
- Comparing two tile sizes for the same room.
- Rounding up to whole boxes.
- Allowing for diagonal layouts with extra wastage.
How to use Tile Calculator
Step 1
Enter the room length and width and any area not tiled.
Step 2
Type the tile size, grout gap and wastage.
Step 3
Optionally add tiles per box, then read the totals.
Good to know
- Worked example: a 4 m by 3 m floor with 600 x 600 mm tiles and no gap is 33.3 tiles. With 10 percent wastage you buy 37.
- Use 10 percent for straight layouts and 15 or more for diagonal or patterned ones.
- Buy all tiles from one batch. Shades can differ between production runs.
Common questions
How much wastage should I allow?
About 10 percent is common for straight layouts. Small rooms, many corners and diagonal layouts need more.
Does the grout gap matter?
Yes, slightly. Each tile takes up its own size plus the gap, so a wider gap means fewer tiles.
What if the room is not a rectangle?
Split it into rectangles, run the calculator for each and add the results, or subtract the missing part as the area not tiled.