CompleteSEOTools
Home › Electrical & Electronics › Solar Sizing Calculator

Solar sizing calculator

Enter your daily energy use and local sun hours to estimate the panels, and optionally the battery, you need.

About Solar Sizing Calculator

Sizing a solar system starts with the energy you use in a day. Divide that by the peak sun hours at your site, after allowing for losses in wiring, heat and the inverter, and you get the array size in kilowatts. Divide by one panel's rating and round up to count panels. If you tick the battery option, the tool also estimates the storage for the days of backup you choose, at a depth of discharge you set. Sun hours are an input because they vary by place and season.

  • A first idea of cost before asking for quotes.
  • Checking an installer's proposal for sense.
  • Estimating batteries for an off-grid home.
  • Comparing panel ratings for a fixed roof area.

How to use Solar Sizing Calculator

1

Step 1

Type your daily energy use in kWh, the peak sun hours and the system losses.

2

Step 2

Enter the rating of the panel you plan to use.

3

Step 3

Tick the battery option if you want storage, then read the panels and the battery size.

Good to know

  • Example: 6 kWh a day, 5 sun hours, 25 percent losses and 400 W panels need a 1.6 kW array, which is 4 panels.
  • The sun hours and panel watts shown are examples. Enter your own. Peak sun hours change by place and by month, so use the worst month if the system must cover the whole year.
  • This is a rough sizing. Roof space, shading, inverter limits and local rules also matter, so get a site survey from a qualified installer before buying.

Common questions

What is a peak sun hour?

One hour of sunlight at 1 kW per square metre. A place with 5 peak sun hours gets as much energy as 5 hours of that strong sun, even if the day is longer.

What system losses should I use?

Losses from wiring, dust, heat, the inverter and charging often add up to 20 to 30 percent. Use the figure from your installer if you have one.

How is the battery sized?

Battery kWh = daily kWh x days of backup / depth of discharge. Dividing by the bank voltage gives amp-hours.