CompleteSEOTools
Home › Construction Calculators › Steel Bar Calculator

Steel bar calculator

Pick bars, slab, beam or column, enter the sizes and spacing and read the steel weight.

About Steel Bar Calculator

The weight of a plain round bar in kilograms per metre is its diameter in millimetres squared, divided by 162.2. The constant follows from the density of steel, about 7,850 kilograms per cubic metre. The tool uses this to weigh a set of bars, a two-way slab mesh, a beam with its stirrups, or a column with its ties. You enter diameters and spacing, plus the lap length and stock length. Results are grouped by bar diameter.

  • Estimating steel for a slab, beam or column.
  • Weighing a stack of bars before ordering.
  • Comparing 10 mm and 12 mm bars.
  • Checking a bar schedule roughly against your own count.

How to use Steel Bar Calculator

1

Step 1

Choose bars, slab, beam or column.

2

Step 2

Enter the sizes, bar diameters and spacing.

3

Step 3

Read the weight, and the length and weight for each diameter.

Good to know

  • Worked example: 12 mm bars weigh 144 / 162.2 = 0.888 kg per metre, so 100 m is about 88.8 kg.
  • This is a quick estimate. Real bar bending schedules include bends, hooks, chairs and cut-offs that are not counted here.
  • Structural steel is for an engineer to specify. Use these figures for budgeting and ordering, and ask a structural engineer for the design.

Common questions

Where does 162.2 come from?

Area of a circle times the density of steel (7,850 kg/m³), with the diameter in millimetres, comes to d² / 162.2 kilograms per metre.

Does it work for ribbed bars?

Yes, the formula is the standard approximation for ribbed and plain bars of the same nominal diameter.

How are laps counted?

When a bar is longer than the stock length, one lap length is added for every joint. In columns, one lap is added to each vertical bar for the next lift.