Battery backup calculator
Enter the load, the battery and the inverter details to see the runtime, or flip it to size the battery.
About Battery Backup Calculator
A battery's rated capacity is not all usable. The inverter wastes some energy, and most batteries should not be run flat. This calculator multiplies the battery voltage and amp-hours by the depth of discharge you allow and by the inverter efficiency, then divides by the load in watts. The second tab works backwards from a runtime you want to the amp-hours you need, and counts batteries of a size you give.
- Knowing how long a home inverter will last in a power cut.
- Sizing a battery for a security camera or router.
- Comparing lead-acid and lithium depth of discharge.
- Planning an off-grid cabin or workshop.
How to use Battery Backup Calculator
Step 1
Choose how long it runs or what battery is needed.
Step 2
Enter the load, battery voltage, capacity or runtime, efficiency and depth of discharge.
Step 3
Read the runtime or the amp-hours, and the energy figures.
Good to know
- Example: 500 W on a 12 V 100 Ah battery, 90 percent efficient and used to 50 percent, runs for about 1 hour 5 minutes.
- Capacity falls when a battery is cold, old or discharged fast, and this estimate ignores those effects. Real runtime is usually shorter.
- Depth of discharge limits depend on the battery type. Read the maker's data sheet before deciding what share to use.
Common questions
How do I calculate battery runtime?
Runtime in hours = volts x amp-hours x depth of discharge x inverter efficiency / load in watts.
Why not use the full capacity?
Running some batteries flat shortens their life. Lead-acid batteries are often used to about half, and lithium iron phosphate to about 80 to 90 percent, but check your data sheet.
Do batteries in parallel add voltage?
No. Parallel batteries add amp-hours at the same voltage. Series batteries add voltage at the same amp-hours.