Roofing calculator
Enter the building size, the overhang and the pitch to get the roof area and the number of pieces.
About Roofing Calculator
A sloping roof has more surface than the floor plan beneath it. The extra is the slope factor, which comes from the pitch: the square root of one plus rise over run, squared. Enter the length and width of the building, the overhang, and the pitch either as rise over run or as an angle. The tool returns the slope factor, the roof area and the number of sheets or tiles from the area one piece covers. It assumes every roof plane has the same pitch.
- Getting a roof area for a quote.
- Counting corrugated sheets or tiles.
- Converting a pitch like 6 in 12 into an angle.
- Seeing how much a steeper roof adds to the area.
How to use Roofing Calculator
Step 1
Type the building length, width and overhang.
Step 2
Enter the pitch as rise and run, or as an angle.
Step 3
Enter the area one sheet or tile covers and read the count.
Good to know
- Worked example: a 10 m by 8 m plan at 6 in 12 has a slope factor of 1.118, so the roof is about 89.4 m².
- Use the covered area of a piece after overlaps. A sheet that is 1.2 m wide may cover 1.0 m.
- Dormers, valleys, chimneys and different pitches on different planes need separate calculation.
Common questions
What is the slope factor?
It is the number you multiply the plan area by to get the roof surface area. A flat roof has a factor of 1, and it grows as the roof gets steeper.
Does a hip roof use the same formula?
Yes, if every plane has the same pitch. The area is still plan area times the slope factor.
How much overhang should I enter?
Use the horizontal distance the eaves extend past the wall. Set it to zero if you do not know.