CompleteSEOTools
Home › Electrical & Electronics › Conduit Fill Calculator

Conduit fill calculator

Type the conduit size and your conductors to see the fill percent and whether it is inside the limit.

About Conduit Fill Calculator

Wires in a conduit must not fill more than a set share of its inside area, so they can be pulled without damage and can shed heat. This calculator compares the combined conductor area with the conduit area. Enter the conduit as an inside diameter or an area, then up to three groups of conductors by count and finished size. It applies the commonly cited 53, 31 and 40 percent limits, or a limit you type, and shows the space left.

  • Checking a planned run before pulling cable.
  • Seeing how many more conductors would fit.
  • Comparing a conduit size with the next one up.
  • Working with sizes from any manufacturer's table.

How to use Conduit Fill Calculator

1

Step 1

Enter the conduit inside size, as a diameter or an area.

2

Step 2

Add up to three groups of conductors: how many and the finished size of one.

3

Step 3

Read the fill percent against the limit.

Good to know

  • The limits used are the commonly cited 53 percent for one conductor, 31 percent for two and 40 percent for three or more. Your local code may differ, so check it.
  • Example: three conductors of 19.6 mm2 each in a 25 mm inside diameter conduit fill about 12 percent.
  • Use the finished size, including insulation, from the cable data sheet. The tool does not carry sizing tables, because they differ between standards.

Common questions

Why is the limit lower for two conductors?

Two conductors of equal size can jam against the wall of the conduit when pulled, so the allowed fill is lower than for three or more.

Do I enter diameter or area?

Either. Use the selector above each size. A diameter is converted with the circle area formula, pi x d squared / 4.

Is this a code check?

No. Codes also cover bends, length, derating and cable type. Use this for planning and ask a licensed electrician for the final call.