CompleteSEOTools
Home › 3D Printing Tools › 3D Print Cost Calculator

3D print cost calculator

Enter the filament weight, print time and your running costs to see the true cost of one good print and a price to charge for it.

About 3D Print Cost Calculator

A print costs more than the filament on the spool. Power, wear on the printer, your own time and the prints that fail all take a share. This calculator adds each one, spreads the cost of failed prints over the good ones, and then applies a markup you choose. For example, a 50 g print at 20 per kg uses 1.00 of filament. Five hours at 150 W and 0.15 per kWh adds 0.11 of power. The rest of the cost comes from the other boxes. Pick your own currency.

  • Setting a fair price for prints you sell.
  • Comparing a printed part with a bought one.
  • Seeing how much of the cost is filament and how much is time.
  • Checking what a higher failure rate does to your margin.

How to use 3D Print Cost Calculator

1

Step 1

Type the filament weight from your slicer, the spool price and the print time.

2

Step 2

Fill in power, electricity price, printer cost and life, and your own time.

3

Step 3

Read the total cost, the cost per hour and the selling price.

Good to know

  • The power figure should be the average draw while printing. A heated bed cycles on and off, so the plug label overstates it. A cheap plug-in energy meter gives the real figure.
  • The failure allowance spreads wasted plastic and power over the prints that work. Your time is not inflated by it, because most of it is spent once per job.
  • The result is an estimate. It leaves out purge and brim waste, spare parts, packaging, postage and tax.

Common questions

How is the failure rate used?

The cost of filament, power and machine wear is divided by (1 minus the failure rate). At 5 percent that is a 5.26 percent increase, the extra spend per good print.

How do I find the printer life in hours?

It is your own guess. Many people use a few thousand hours for a hobby printer. A lower number makes wear cost more.

Is the selling price the same as profit?

No. The markup is added on top of cost. The profit is the selling price minus the total cost, and it is shown beside the price.