Filament calculator
Type the weight, volume or length you know and see the other two, the share of a 1 kg spool and the cost.
About Filament Calculator
Slicers report filament as grams, metres or both, and spools are sold by weight. This calculator links the three through the filament diameter and the density of the plastic. It uses typical densities of 1.24 g/cm3 for PLA, 1.27 for PETG, 1.04 for ABS and 1.21 for TPU, or a density you enter. A 1.75 mm strand holds about 2.4 cm3 of plastic per metre, so one metre of PLA weighs close to 3 g. Add a price per kg to see what the print costs.
- Checking how many metres are left on a part-used spool.
- Turning a slicer length into grams for pricing.
- Estimating whether a spool is enough for a big job.
- Comparing the real length on a 1 kg spool of different materials.
How to use Filament Calculator
Step 1
Pick whether you know the weight, volume or length, and type it.
Step 2
Choose the diameter and the material, or type your own density.
Step 3
Read the other two values, the spool share and the cost.
Good to know
- Brands differ. Filled or coloured filament can be denser than the typical value, so use the spool label if it gives a density.
- Spool diameters are nominal. Real filament varies by a few hundredths of a millimetre, which moves the length by a few percent.
- Use the slicer's weight, not the model volume. Infill and walls are already counted there.
Common questions
How long is 1 kg of 1.75 mm PLA?
About 335 metres, using a density of 1.24 g/cm3. PETG is a little shorter and ABS a little longer.
Why is 2.85 mm filament sometimes called 3 mm?
Printers that use it are sold as 3 mm machines, but the filament itself is about 2.85 mm across.
Does this include the weight of the spool?
No. It only covers the plastic. An empty spool weighs a few hundred grams and varies by brand.