CompleteSEOTools
Home › Electrical & Electronics › Decibel Calculator

Decibel calculator

Pick what you want to convert, type the values and read the answer in decibels or as a plain ratio.

About Decibel Calculator

The decibel is a logarithmic way to compare two levels. Power ratios use 10 log10 and voltage or current ratios use 20 log10. This page converts both ways, switches between milliwatts and dBm, between volts and dBV, and adds up a list of gains and losses for a chain of stages. It also combines separate signal levels that add as power. Each result shows the plain number and the decibel figure side by side.

  • Working out gain or loss across an amplifier or cable.
  • Converting radio levels between dBm and milliwatts.
  • Adding the stages of a signal chain.
  • Reading audio levels in dBV against volts.

How to use Decibel Calculator

1

Step 1

Pick a tab such as power ratio, dBm or add dB values.

2

Step 2

Type the numbers it asks for.

3

Step 3

Read the result and the matching plain ratio.

Good to know

  • Rules of thumb: 3 dB is about double the power, 10 dB is ten times the power, and 6 dB is about double the voltage.
  • Example: 1 W is 30 dBm, and two equal 3 dBm signals combined as power give about 6 dBm.
  • The voltage formula matches the power formula only when both voltages are across the same impedance. Use RMS voltages for dBV.

Common questions

Why 10 for power and 20 for voltage?

Power goes with the square of voltage when the impedance is fixed. Taking the logarithm of a square doubles the factor, so 10 log becomes 20 log.

What is 0 dBm?

One milliwatt. 30 dBm is one watt and -30 dBm is one microwatt.

Can I add dBm values directly?

Not as a sum. Adding dB gains and losses in a chain is fine, but two separate signals combine by adding their powers, which the last tab shows.